A multi-stage filtration process is used by Reverse Osmosis systems (RO) to remove various contaminants from water. To make water safe for consumption, the water purification system uses thin membranes to remove impurities and chemicals from water. This thin membrane, a polymer film, filters the contaminated water with tiny pores. The membrane removes any minerals or micro-organisms found in the water. An outlet pipe removes impurities. To ensure that your water purifier is working properly, it's important to maintain it. If the water purifier is not properly maintained and taken care of, it will stop working and could lead to contaminated water. This blog will discuss some tips that can help you maintain an RO water purifier. Keep reading.

Maintaining RO Filters is Important

RO water purifiers are important in removing various types of impurities. Different filtration stages remove different sizes of impurities to make water safe. To ensure that your water purifier runs smoothly, it is essential to keep RO filters clean. The reverse osmosis process consists of three stages: pre-filter; reverse osmosis; and post-filtration. The prefiltration stage is responsible for removing sand and silt from water. To protect the RO Membrane, it is vital to use the pre-filtration stage. It is possible to damage the RO membrane by not changing the prefilters. The water purification process could also be affected.

Maintaining the RO Membrane

Water is forced through the membrane by 35 psi during reverse osmosis. The RO membrane thinly separates the solvent from the solutes and allows only the pure solvent to pass through. It is crucial to maintain the RO membrane, which is an essential part of the water purifier. The RO membrane must be replaced every 3-4 month to avoid clogging pores.

Regular filter change

An RO purifier's filter needs to be replaced every 3 months. Water contaminants can clog filters in a short time. It will reduce the water purifier's capacity to filter water and affect the water quality. You can transfer impurities to your water if you use filters and do not change them. You should schedule your filter change regularly, since RO water purifiers go through at most three to twelve stages.

Sediment Filter

RO water purifiers have multiple filters that remove impurities in the water. The RO purifier's sediment filter is one of the filters. At least once per year, you should change your sediment filter. It helps to stain dirt, sediment, or slit. It keeps dirt from reaching fine RO membranes.

Carbon Filter

Also, the carbon filter must be changed every year. A carbon filter removes harmful contaminants such as chlorine, which can affect the RO membrane's performance and life expectancy. The taste and odor of your water can also be affected by the filter.

RO Membrane Replacement

RO Membrane

RO purifiers are equipped with a semipermeable membrane. This allows water to pass through the membrane but removes all contaminants. You should replace the RO membrane every two to three month for best performance. Keep in mind, however, that this schedule will depend on the water quality and household water usage.

Leakages and Drips

Don't ignore any drips or leakages. Get professional help. You should take proper precautions to prevent water purifier leakages from causing serious problems. Ask a professional to examine the water purifier in order to determine the cause and prevent further damage.

Sanitize Your RO Tank

The RO tank pipes must be cleaned regularly in order to ensure the purifier's optimal performance. You can keep the RO tank clean and in good condition by sanitizing it. The RO tank should be cleaned after replacing the filters to get the best results.

Annual Maintenance

You should get professional help to replace your RO purifier filters in order to avoid any major problems. LONTED is a trusted brand that offers AMCs (Annual Maintenance Contracts), which are a convenient and simple way to maintain your appliance.

Summarizing the Process

Replace all filters at least once a year.

Each year, replace the RO membranes

Clean the water storage tanks

You should clean and sanitize pipes every 2 years

If necessary, you can replace or buy new parts

At regular intervals, check the pressure gauge.