The multi-stage Reverse Osmosis (RO), filtration process removes different contaminants from water. Water purification systems use a thin membrane to remove chemicals, salts and impurities from the water. This thin membrane (a polymer film), has very small pores that filters the contaminated water. The membrane removes minerals and micro-organisms from water. The water purifier also has an outlet pipe that flushes out impurities. You must maintain your water purifier to ensure safe and clean drinking water. The water purifier won't work properly if you don't take proper care of it. You may also end up with contaminated drinking water. We will be sharing some tips to help you maintain your RO water purifier. Continue reading.

How important it is to maintain RO filters

Water purifiers with RO filtration play an important role in eliminating different kinds of impurities. Water safe to drink is made safer by the different stages of filtration. It is important to maintain RO filters in order for the water purifier to work smoothly. The three stages of a reverse osmosis system are pre-filter, reverse-osmosis, and post-filtration. The pre-filtration stage removes sand, silt, and other residual particles from the water. Pre-filtration is essential to protect the RO Membrane from damage. The RO membrane could be damaged if the pre-filters are not changed. Water purification may also be affected.

Maintaining the RO Membrane

The reverse osmosis stage requires water to be pushed through the membrane at 35 psi. The RO membrane is thin and separates the solutes from solvent. Only pure solvents are allowed to pass through it. The RO membrane is an integral part of your water purifier system. Regular cleaning and maintenance are essential to ensure you have clean, safe, and delicious drinking water. To prevent pores from clogging, the RO membrane should be replaced every 3-4 months.

Regular filter changes

After 3 months, the filter on an RO purifier should be replaced. This is because water contaminants build up quickly and clog filters. The water purifier's filtration capacity and water quality will be affected if it is not cleaned regularly. The impurities in your water will be transferred to it if you keep using the filters. It is crucial to schedule filter changes on a regular basis, as RO water purifiers can go through at least three to twelve stages.

Sediment Filter

RO water purifiers employ multiple filters to remove impurities from water. The RO purifier uses a sediment filter as one of its filters. Your sediment filter should be changed at least once a year. Your sediment filter will help to remove dirt, sediment, and slit. It prevents dirt and grime from reaching the RO membranes.

Carbon Filter

The carbon filter should be changed once per year. The carbon filter is used to remove chlorine and other harmful contaminants from the RO membrane. You can also get a better taste and odor from the water filter.

RO Membrane Replacement

RO Membrane

RO purifiers have a semi-permeable membrane that allows water to flow through it, but does not filter out any other contaminants. The RO membrane should be replaced every two to three months for optimal performance. This schedule depends on household water use and the quality of your water.

Leakages and Drips

If you see drips or leakages in your water purifier, make sure to contact a professional. If you don't take corrective steps, water purifier leakages can cause serious damage. To find out the source of the leakage, ask a professional to inspect the water purifier and save it from further damage.

Sanitize Your RO Tank

To ensure that the RO system works properly, you must also clean it regularly. The RO tank can be cleaned regularly to maintain its health and condition. To get the best results, clean the RO tank after you have replaced the filters.

Annual Maintenance

If you want to avoid serious problems with your RO purifier, it is important that you have the assistance of a professional to change the filters. LONTED, a well-respected brand, offers an AMC (Annual Maintenance Contract), which is a simple and easy way to maintain your appliance.

The Process summarized

All filters should be replaced every year or every 12 months.

Every year, replace the RO membranes

Water storage tanks should be cleaned

Every 2 years, make sure you clean and sanitize your pipes

When necessary, replace and purchase any defective parts

Regularly check the pressure nozzle